Schneider ATV310HU30N4E

$ 164,00 Request exact price

Terms of sale:

  • Done Price Without Shipping:
    Our prices are listed without shipping costs. Shipping charges will be calculated and added during checkout based on your location and preferred shipping method.
  • Done Price Variability:
    Please note that prices are not fixed and may change due to factors such as market fluctuations, supplier costs, or promotional offers.
  • Done Worldwide Delivery:
    We offer delivery to almost any country worldwide. During checkout, you can select your country for shipping options and associated costs.
  • Check Mark These terms ensure transparency and flexibility in pricing and shipping options for our customers across the globe.
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
Category:

Description

Main
Range of productEasy Altivar 310
Product or component typeVariable speed drive
Product specific applicationSimple machine
Assembly styleWith heat sink
Device short nameATV310
Network number of phasesThree phase
[Us] rated supply voltage380…460 V – 15…10 %
Motor power kW3 kW
Motor power hp4 hp
noise level50 dB
Complementary
Product destinationAsynchronous motors
Quantity per setSet of 1
EMC filterWithout EMC filter
Type of coolingIntegrated fan
Supply frequency50/60 Hz +/- 5 %
communication port protocolModbus
Connector typeRJ45 (on front face) for Modbus
Physical interface2-wire RS 485 for Modbus
Transmission frameRTU for Modbus
Transmission rate4800 bit/s
9600 bit/s
19200 bit/s
38400 bit/s
Number of addresses1…247 for Modbus
Communication serviceRead holding registers (03) 29 words
Write single register (06) 29 words
Write multiple registers (16) 27 words
Read/write multiple registers (23) 4/4 words
Read device identification (43)
Line current9.2 A
46.6 A
Apparent power7.3 kVA
31.2 kVA
Prospective line Isc5 kA
5 kA
Continuous output current7.1 A at 4 kHz
36 A at 4 kHz
Maximum transient current10.7 A for 60 s
39.6 A for 60 s
Power dissipation in W80.24 W at In
508.9 W at In
Speed drive output frequency0.5…400 Hz
Nominal switching frequency4 kHz
Switching frequency2…12 kHz adjustable
Speed range1…20
Transient overtorque170…200 % of nominal motor torque depending on drive rating and type of motor
Braking torqueUp to 150 % of nominal motor torque with braking resistor at high inertia
Up to 70 % of nominal motor torque without braking resistor
Asynchronous motor control profileEnergy saving ratio
Energy saving ratio
Sensorless flux vector control
Motor slip compensationPreset in factory
Adjustable
Output voltage380…460 V three phase
Electrical connectionTerminal, clamping capacity: 1.5…4 mm² (L1, L2, L3, PA/+, PB, U, V, W)
Tightening torque1.2…1.4 N.m
InsulationElectrical between power and control
SupplyInternal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection
Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
Analogue input number1
Analogue input typeConfigurable current AI1 0…20 mA 250 Ohm
Configurable voltage AI1 0…10 V 30 kOhm
Configurable voltage AI1 0…5 V 30 kOhm
Discrete input number4
Discrete input typeProgrammable LI1…LI4 24 V 18…30 V
Discrete input logicNegative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm
Positive logic (source), 0…< 5 V (state 0), > 11 V (state 1)
Sampling duration10 ms for analogue input
20 ms, tolerance +/- 1 ms for logic input
Linearity error+/- 0.3 % of maximum value for analogue input
Analogue output number1
Analogue output typeAO1 software-configurable voltage: 0…10 V, impedance: 470 Ohm, resolution 8 bits
AO1 software-configurable current: 0…20 mA, impedance: 800 Ohm, resolution 8 bits
Discrete output number2
Discrete output typeLogic output LO+, LO-
Protected relay output R1A, R1B, R1C 1 C/O
Minimum switching current5 mA at 24 V DC for logic relay
Maximum switching current2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay
3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay
4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay
Acceleration and deceleration rampsU
S
Linear from 0…999.9 s
Braking to standstillBy DC injection, <30 s
Protection typeLine supply overvoltage
Line supply undervoltage
Overcurrent between output phases and earth
Overheating protection
Short-circuit between motor phases
Against input phase loss in three-phase
Thermal motor protection via the drive by continuous calculation of I²t
Frequency resolutionAnalog input: converter A/D, 10 bits
Display unit: 0.1 Hz
Time constant20 ms +/- 1 ms for reference change
operating positionVertical +/- 10 degree
Height184 mm
Width140 mm
Depth151 mm
Net weight1.8 kg
Environment
Electromagnetic compatibilityElectrical fast transient/burst immunity test – test level: level 4 conforming to EN/IEC 61000-4-4
Electrostatic discharge immunity test – test level: level 3 conforming to EN/IEC 61000-4-2
Immunity to conducted disturbances – test level: level 3 conforming to EN/IEC 61000-4-6
Radiated radio-frequency electromagnetic field immunity test – test level: level 3 conforming to EN/IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
Surge immunity test – test level: level 3 conforming to EN/IEC 61000-4-5
StandardsEN/IEC 61800-3
EN/IEC 61800-3
IP degree of protectionIP20 without blanking plate on upper part
IP40 top
Pollution degree2 conforming to EN/IEC 61800-5-1
Environmental characteristicDust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3
Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Shock resistance15 gn conforming to EN/IEC 60068-2-27 for 11 ms
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for storage-25…70 °C
Ambient air temperature for operation-10…55 °C without derating
55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C
Operating altitude<= 1000 m without derating
Packing Units
Unit Type of Package 1Db
Number of Units in Package 11
Package 1 Height19.0 cm
Package 1 Width18.5 cm
Package 1 Length23.0 cm
Package 1 Weight2.1 kg
Unit Type of Package 2Doboz
Number of Units in Package 22
Package 2 Height30.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight4.776 kg

Related products