Showing 1–16 of 46 resultsSorted by latest
buy Allen Bradley Manufacturer Allen-Bradley Brand Allen-Bradley Part Number 2198-D012-ERS4 Per Axis X Module Type Dual-axis Inverter Product Line Kinetix Servo Bandwidth Velocity loop, max and Current loop 400 Hz, 1000 Hz AC input frequency 4 kHz Continuous output current (rms) 5.0 A Continuous output current (0-pk) 7.0 A Continuous power out (nom) 324…528V rms,…
buy Allen Bradley Application in domestic- and commercial area permitted yes Dynamic brake chopper included yes Dynamic brake resistor fitted yes IP-rating IP20 Mains frequency 50/60 Hz Mains voltage 380…480 V Nominal output current I2N 8 A Number of analogue inputs 0 Number of analogue outputs 0 Number of digital inputs 4 Number of digital…
The Allen-Bradley 5069-OBV8S is a Compact 5000 Digital 8-point Safety Sourcing Output Module. This module features Eight (8) output channels that operates at voltage range of 17.5-32VDC. It provides output current of 1 A per channel. This module is rated SIL CL3, PLe, Cat. 4 with safety reaction time of 4.5 ms .
Brand:Allen-Bradley Contact Configuration:3 N.O. 1 N.C. Contact Type:Standard Contacts Control Voltage:24V DC Electronic Coil Terminal Type:Screw Terminals Relay Coil Voltage:4-Pole DC Coil Voltage
The Allen-Bradley 5069-AENTR is a Compact 5000 Ethernet I/P adapter. It allows connection to Ethernet networks via the built-in Two (2) Ethernet communication ports, functioning as embedded switch and supporting Linear, Star and Device Level Ring (DLR) topologies. It supports transmission speed of 10/100 Mbps and 1Gbps communicate rate and supports up to 31 Compact…
The Allen-Bradley 2198-S086-ERS3 exhibits 29.7 kWatts Continuous Output Power, 22-40 lb*in (2.5-4.5 N*m) Torque Value, and 560 Microfarads Internal Capacitance.
The Allen-Bradley 2198-D012-ERS3 is an axis module that is part of the Kinetix Ethernet I/P 5700 servo system. This servo drive is a dual-axis inverter with continuous output power of 1.7 kW at 240V input, and 3.4 kW @ 480V input. It has continuous output current of 7.0 A and continuous peak current of 17.6…
5 pin screw terminal block connector interface for encoder connection to K5700 Drives
Brand:Allen-Bradley Sub Brand:5380 Controllers Category:Controllers Controller Capacity:2 MB Ethernet/IP Nodes supported (max):40 I/O Modules (max):16 Integrated Motion:8
Kinetix 5700 Connector Kit DC Bus Supply 85mm (Includes Spare connectors input power, i/o, enable, 24V, shunt, and 2 end caps) To be used with 2198-P141 and 2191-P208
Kinetix 5700 DC Bus Supply Height 433 mm Width 85 mm Depth 250 mm
Kinetix 5700 Connector Kit DC Bus Supply 55mm (Includes Spare connectors input power, i/o, enable, 24V, shunt, and 2 end caps) To be used with 2198-P031 and 2198-P070
Kinetix 5500 Servo Drive, 32.5 Amp peak current output, 3 phase 190 – 528 VAC input
Kinetix 5500 Servo Drive, 12.5 Amp Peak Current Output, 1 and 3 Phase 190 – 528 VAC Input
Kinetix 5500 Servo Drive, 6.3 Amp Peak Current Output, 1 and 3 Phase 190 – 528 VAC Input
No products in the cart.
