Schneider ATV310HU40N4E
$ 184,00 Request exact price
Terms of sale:
- Price Without Shipping:
Our prices are listed without shipping costs. Shipping charges will be calculated and added during checkout based on your location and preferred shipping method. - Price Variability:
Please note that prices are not fixed and may change due to factors such as market fluctuations, supplier costs, or promotional offers. - Worldwide Delivery:
We offer delivery to almost any country worldwide. During checkout, you can select your country for shipping options and associated costs. - These terms ensure transparency and flexibility in pricing and shipping options for our customers across the globe.
Category: Schneider
Description
Range of product | Easy Altivar 310 |
---|---|
Product or component type | Variable speed drive |
Product specific application | Simple machine |
Assembly style | With heat sink |
Device short name | ATV310 |
Network number of phases | Three phase |
[Us] rated supply voltage | 380…460 V – 15…10 % |
Motor power kW | 4 kW |
Motor power hp | 5.5 hp |
noise level | 50 dB |
Product destination | Asynchronous motors |
---|---|
Quantity per set | Set of 1 |
EMC filter | Without EMC filter |
Type of cooling | Integrated fan |
Supply frequency | 50/60 Hz +/- 5 % |
communication port protocol | Modbus |
Connector type | RJ45 (on front face) for Modbus |
Physical interface | 2-wire RS 485 for Modbus |
Transmission frame | RTU for Modbus |
Transmission rate | 4800 bit/s 9600 bit/s 19200 bit/s 38400 bit/s |
Number of addresses | 1…247 for Modbus |
Communication service | Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43) |
Line current | 11.4 A |
Apparent power | 9.1 kVA |
Prospective line Isc | 5 kA |
Continuous output current | 9.5 A at 4 kHz |
Maximum transient current | 14.3 A for 60 s |
Power dissipation in W | 102.72 W at In |
Speed drive output frequency | 0.5…400 Hz |
Nominal switching frequency | 4 kHz |
Switching frequency | 2…12 kHz adjustable |
Speed range | 1…20 |
Transient overtorque | 170…200 % of nominal motor torque depending on drive rating and type of motor |
Braking torque | Up to 150 % of nominal motor torque with braking resistor at high inertia Up to 70 % of nominal motor torque without braking resistor |
Asynchronous motor control profile | Quadratic voltage/frequency ratio Energy saving ratio Sensorless flux vector control |
Motor slip compensation | Adjustable Adjustable |
Output voltage | 380…460 V three phase |
Electrical connection | Terminal, clamping capacity: 2.5…4 mm² (L1, L2, L3, PA/+, PB, U, V, W) |
Tightening torque | 1.2…1.4 N.m |
Insulation | Electrical between power and control |
Supply | Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection |
Analogue input number | 1 |
Analogue input type | Configurable current AI1 0…20 mA 250 Ohm Configurable voltage AI1 0…10 V 30 kOhm Configurable voltage AI1 0…5 V 30 kOhm |
Discrete input number | 4 |
Discrete input type | Programmable LI1…LI4 24 V 18…30 V |
Discrete input logic | Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm Positive logic (source), 0…< 5 V (state 0), > 11 V (state 1) |
Sampling duration | 10 ms for analogue input 20 ms, tolerance +/- 1 ms for logic input |
Linearity error | +/- 0.3 % of maximum value for analogue input |
Analogue output number | 1 |
Analogue output type | AO1 software-configurable voltage: 0…10 V, impedance: 470 Ohm, resolution 8 bits AO1 software-configurable current: 0…20 mA, impedance: 800 Ohm, resolution 8 bits |
Discrete output number | 2 |
Discrete output type | Logic output LO+, LO- Protected relay output R1A, R1B, R1C 1 C/O |
Minimum switching current | 5 mA at 24 V DC for logic relay |
Maximum switching current | 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay |
Acceleration and deceleration ramps | Linear from 0…999.9 s S Linear from 0…999.9 s |
Braking to standstill | By DC injection, <30 s |
Protection type | Line supply overvoltage Line supply undervoltage Overcurrent between output phases and earth Overheating protection Short-circuit between motor phases Against input phase loss in three-phase Thermal motor protection via the drive by continuous calculation of I²t |
Frequency resolution | Analog input: converter A/D, 10 bits Display unit: 0.1 Hz |
Time constant | 20 ms +/- 1 ms for reference change |
operating position | Vertical +/- 10 degree |
Height | 184 mm |
Width | 140 mm |
Depth | 151 mm |
Net weight | 1.8 kg |
Electromagnetic compatibility | Electrical fast transient/burst immunity test – test level: level 4 conforming to EN/IEC 61000-4-4 Electrostatic discharge immunity test – test level: level 3 conforming to EN/IEC 61000-4-2 Immunity to conducted disturbances – test level: level 3 conforming to EN/IEC 61000-4-6 Radiated radio-frequency electromagnetic field immunity test – test level: level 3 conforming to EN/IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11 Surge immunity test – test level: level 3 conforming to EN/IEC 61000-4-5 |
---|---|
Standards | EN/IEC 61800-5-1 EN/IEC 61800-3 |
IP degree of protection | IP20 without blanking plate on upper part IP40 top |
Pollution degree | 2 conforming to EN/IEC 61800-5-1 |
Environmental characteristic | Dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3 Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3 |
Shock resistance | 15 gn conforming to EN/IEC 60068-2-27 for 11 ms |
Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3 |
Ambient air temperature for storage | -25…70 °C |
Ambient air temperature for operation | -10…55 °C without derating 55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C |
Operating altitude | <= 1000 m without derating |
Unit Type of Package 1 | Db |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 18.8 cm |
Package 1 Width | 18.29 cm |
Package 1 Length | 23.11 cm |
Package 1 Weight | 2.16 kg |
Unit Type of Package 2 | Doboz |
Number of Units in Package 2 | 2 |
Package 2 Height | 30 cm |
Package 2 Width | 30 cm |
Package 2 Length | 40 cm |
Package 2 Weight | 4.981 kg |