Schneider ATV32H075N4

Schneider ATV32H075N4

$ 477,00 Request exact price

Terms of sale:

  • Done Price Without Shipping:
    Our prices are listed without shipping costs. Shipping charges will be calculated and added during checkout based on your location and preferred shipping method.
  • Done Price Variability:
    Please note that prices are not fixed and may change due to factors such as market fluctuations, supplier costs, or promotional offers.
  • Done Worldwide Delivery:
    We offer delivery to almost any country worldwide. During checkout, you can select your country for shipping options and associated costs.
  • Check Mark These terms ensure transparency and flexibility in pricing and shipping options for our customers across the globe.
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
Category:

Description

Main
range of productAltivar 32
Product or component typeVariable speed drive
Product destinationSynchronous motors
Asynchronous motors
Product specific applicationComplex machines
Function available–
Assembly styleWith heat sink
Component nameATV32
EMC filterClass C2 EMC filter integrated
Network number of phases3 phases
[Us] rated supply voltage380…500 V – 15…10 %
Supply voltage limits323…550 V
Supply frequency50…60 Hz – 5…5 %
Network frequency47.5…63 Hz
Motor power kW0.75 kW at 380…480 V
Motor power hp1 hp at 380…480 V
Complementary
Line current2.7 A for 500 V 3 phases 0.75 kW / 1 hp
3.6 A for 380 V 3 phases 0.75 kW / 1 hp
Apparent power2.3 kVA at 500 V 3 phases 0.75 kW / 1 hp
Prospective line Isc5 kA for 3 phases
Nominal output current2.3 A at 4 kHz 500 V 0.75 kW / 1 hp
Maximum transient current3.5 A for 60 s 0.75 kW / 1 hp
Output frequency0.0005…0.599 kHz
Nominal switching frequency4 kHz
Switching frequency2…16 kHz adjustable
Speed range1…100 for asynchronous motor in open-loop mode
Speed accuracy+/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy+/- 15 %
Transient overtorque170…200 %
Braking torque<= 170 % with braking resistor
Asynchronous motor control profileVoltage/frequency ratio, 2 points
Flux vector control without sensor – Energy Saving, NoLoad law
Voltage/frequency ratio, 5 points
Flux vector control without sensor, standard
Voltage/frequency ratio – Energy Saving, quadratic U/f
Synchronous motor control profileVector control without sensor
Regulation loopAdjustable PID regulator
Motor slip compensationNot available in voltage/frequency ratio (2 or 5 points)
Automatic whatever the load
Adjustable 0…300 %
Local signalling1 LED red for drive voltage
1 LED green for CANopen run
1 LED red for CANopen error
1 LED red for drive fault
Output voltage<= power supply voltage
Noise level43 dB conforming to 86/188/EEC
InsulationElectrical between power and control
Electrical connectionScrew terminal, clamping capacity: 0.5…1.5 mm², AWG 18…AWG 14 (control)
Removable screw terminals, clamping capacity: 1.5…2.5 mm², AWG 14…AWG 12 (motor/braking resistor)
Screw terminal, clamping capacity: 1.5…4 mm², AWG 14…AWG 10 (power supply)
Tightening torque0.5 N.m, 4.4 lb/ft (control)
0.7 N.m, 7.1 lb/ft (motor/braking resistor)
0.6 N.m, 5.3 lb/ft (power supply)
SupplyInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Analogue input number3
Analogue input typeAI1 voltage: 0…10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits
AI3 current: 0…20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
Sampling duration2 ms (AI1, AI2, AI3) – analog input(s)
2 ms (AO1) – analog input(s)
Response timeLI1…LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)
R1A, R1B, R1C 2 ms for relay output(s)
R2A, R2C 2 ms for relay output(s)
Accuracy+/- 0.2 % (AI1, AI2, AI3) for a temperature of -10…60 °C
+/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C
+/- 1 % (AO1) for a temperature of 25 °C
+/- 2 % (AO1) for a temperature of -10…60 °C
Linearity error+/- 0.2…0.5 % of maximum value (AI1, AI2, AI3)
+/- 0.3 % (AO1)
Analogue output number1
Analogue output typeAO1 software-configurable current 0…20 mA, impedance: 800 Ohm, resolution 10 bits
AO1 software-configurable voltage 0…10 V, impedance: 470 Ohm, resolution 10 bits
Discrete output number3
Discrete output typeConfigurable relay logic: (R1A, R1B, R1C) NO/NC – 100000 cycles
Configurable relay logic: (R2A, R2B) NO – 100000 cycles
Logic: (LO)
Minimum switching current5 mA at 24 V DC for configurable relay logic
Maximum switching currentR1: 3 A at 250 V AC resistive load, cos phi = 1
R1: 4 A at 30 V DC resistive load, cos phi = 1
R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
R2: 5 A at 250 V AC resistive load, cos phi = 1
R2: 5 A at 30 V DC resistive load, cos phi = 1
Discrete input number7
Discrete input typeProgrammable (sink/source) (LI1…LI4)24…30 V DC, with level 1 PLC
Programmable as pulse input 20 kpps (LI5)24…30 V DC, with level 1 PLC
Switch-configurable PTC probe (LI6)24…30 V DC
Safe torque off (STO)24…30 V DC – 1500 Ohm
Discrete input logicNegative logic (sink) (LI1…LI6), > 19 V (state 0), < 13 V (state 1)
Positive logic (source) (LI1…LI6), < 5 V (state 0), > 11 V (state 1)
Acceleration and deceleration rampsS
Deceleration ramp adaptation
Linear
CUS
Deceleration ramp automatic stop DC injection
Ramp switching
U
Braking to standstillBy DC injection
Protection typeInput phase breaks: drive
Overcurrent between output phases and earth: drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: drive
communication port protocolModbus
CANopen
Connector type1 RJ45 (on front face) for Modbus/CANopen
Physical interface2-wire RS 485 for Modbus
Transmission frameRTU for Modbus
Type of polarizationNo impedance for Modbus
Number of addresses1…127 for CANopen
1…247 for Modbus
Method of accessSlave CANopen
Electromagnetic compatibility1.2/50 µs – 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3
Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Width45 mm
Height325 mm
Depth245 mm
Net weight2.5 kg
Option cardCommunication card for CANopen daisy chain
Communication card for CANopen open style
Communication card for DeviceNet
Communication card for EtherNet/IP
Communication card for Profibus DP V1
FunctionalityMid
Specific applicationOther applications
Environment
standardsEN/IEC 61800-3
EN/IEC 61800-5-1
EN 61800-3 environments 1 category C2
EN 55011 class A group 1
EN 61800-3 environments 2 category C2
Product certificationsC-Tick
CSA
NOM 117
UL
GOST
MarkingCE
Pollution degree2 conforming to EN/IEC 61800-5-1
IP degree of protectionIP20 conforming to EN/IEC 61800-5-1
Vibration resistance1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f = 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3
5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation-10…50 °C without derating
50…60 °C with derating factor
Ambient air temperature for storage-25…70 °C
Operating altitude<= 1000 m without derating
1000…3000 m with current derating 1 % per 100 m
operating positionVertical +/- 10 degree
Contractual warranty
Warranty18 months

Related products